How to Balance a Long Draw Draft System in 6 Steps
By Wholesale Beer Parts
A long draw draft system is balanced when the pressure on the keg equals the total restriction between the keg and the faucet: line resistance, plus about 0.5 PSI for every foot the beer climbs, plus about 3 PSI for the tower shank and faucet. Set the CO2 pressure the beer needs first, make up the rest of the push with nitrogen through a gas blender, then fine-tune each tap at the tower. Get it right and every tap pours a pint in about 8 seconds with a clean head. Most long draw foam calls aren't a bad faucet. The system was never balanced, or something changed (a new line, a moved tower, a different beer) and nobody re-ran the numbers. Here's the method in six steps. In this article What… Read the full post on wholesalebeerparts.com