Kegerator Parts Guide: Every Component Explained (Plus Setup Steps)
By Wholesale Beer Parts
A kegerator has six core parts: the keg coupler, the CO2 tank and primary regulator, the gas line, the beer line, the tower shank, and the faucet. CO2 pushes beer out of the keg through the coupler, up the beer line, through the shank, and out the faucet into the glass. Most systems dispense standard ales and lagers at 10 to 12 PSI and hold the keg at about 38°F. If a part in that chain wears out or gets the wrong fitting, the pour suffers, so knowing what each piece does makes troubleshooting and replacement a lot less guesswork. In this article What parts make up a kegerator What is a keg coupler and which type do you need What do the tower and shank do Which beer faucet should you use… Read the full post on wholesalebeerparts.com