SKIN : Skin should be loose with some loose neck wrinkles acceptable, but bodies should be free of wrinkles.
FLEECE : Sample from mid-side 17-23 micron and consistent wool with 90% of wool within a two micron range with a staple length of 3.5” to 5.5”. Fleece should be dense soft wool. Fleece weight mature ewe 5-8 lbs. (January 24 2015 The ACSA Board agreed to accept for registration a cormo sheep with finer wool. )
The following breed guidelines were developed by the American Cormo Sheep Association . These guidelines are to be considered as goals for the future of the breed and are to be used as a guideline .
High Yield
Uniformity throughout the fleece
Staple length 3-5 inches
Dense white wool
Good elasticity or memory
Free of hair, kemp or colored fiber
Micron count 23 or less
Rams and ewes have open faces, free of wool
Wool is carried over the poll, around the ears and down the cheeks
Ears are small
Unacceptable traits: horns or scurs
wooly face
roman nose
undershot or overshot jaw
large or pendulous ears
A clean top line is desirable, with a slight to no dip behind the shoulders, and the straight line should carry to the hip
Well-sprung ribs and good body capacity are desirable.
Freedom from anatomical or physcial defects
Rams should exhibit a masculine appearance, and have well-developed and uniform testicles Undesirable Ram traits: undescended testicles or a single testicle and split scrotums
Ewes should be feminine in appearance with a good width in the pelvis and well-formed udders Undesirable Ewe traits: more than two functional teats
residual teats should be non-existent
Front legs should be straight and set squarely under the shoulders
Hind legs should show a straight line from the pin bone down through the hock to the pastern
Viewed from the side, the rear cannon bone should be at right angle to the ground and not fall behind the pin bone (sickle hock)
Pasterns should be clearly upright and hooves should be well shaped